4 Transmitter
85
Shown on the
display
7
Can be used for
collective alarm
8
Additional
message end
9
1-point adjustment
x
2-point adjustment
11.3%
x
2-point adjustment
75.3 %
x
Probe reset
x
2-point adjustment
drift
x
T ambient high
x
x
T ambient low
x
x
Supply voltage low
x
x
T process high
x
x
T process low
x
x
Condensation x x
Values less than
0 % RH
x x
Sensor early warning
x
No probe signal
x
Watchdog error
x
% RH short-circuit
x
x
% RH sensor broken
x
x
T short-circuit
x
x
T sensor broken
x
x
Heat function
defective
x x
Perform the
Confirm message
function (acknowledgement of the
alarm via the control keys on the transmitter):
•
The message/alarm is no longer shown on the display and the
optical alarm goes out, where applicable. If multiple
messages/alarms are active at the same time, all are reset
simultaneously.
•
If at least one message is assigned to the collective alarm, the
collective alarm is reset. If the collective alarm is set on a relay,
the relay is also reset, meaning switched to its neutral position.
1.800.561.8187
www.
Testo-Direct
.ca
All manuals and user guides at all-guides.com
