4 Transmitter
22
4.3.2.2.
Connecting voltage supply and analog outputs
Terminal strip for voltage
supply and analog outputs,
item (
5
) of 4.3.2.1.
overview of terminals
Channels 2 and 3 shown on the circuit board cannot be
used with this instrument.
1.
Disconnect connector.
2.
Strip the cable ends, clamp wire end ferrules on and screw
down onto voltage terminals.
3.
Insert connector into socket.
Wiring diagram for 4-wire system (0 to 20 mA/4 to 20 mA/0 to
1 V/0 to 5 V/0 to 10 V)
1-channel
0 to 20 mA/4 to 20 mA
max. load per 500 Ω
0 to 1 V/0 to 5
V/0 to 10 V
Channels 2 and 3 shown on the circuit board cannot be
used with this instrument.
Requirement for the connecting cable of the supply:
• Insulated with cross-section of at least 0.25 mm²,
maximum 2.7 mm² without wire end sleeves.
• The supply line must be secured against exceeding 8 A.
• An OFF switch must be installed in an easily accessible
Содержание 6351
