4 Transmitter
36
4.4.6.
The individual main menus
4.4.6.1.
Editing main menu of channel 1
An overview is given in 4.4.5.Overview of the testo 6351 user
menu).
You can perform basic settings for channel 1.
1.
In the Measuring Mode press
SET
, select
Main Menu
Channel 1
with
or
and confirm selection with
SET
.
One of the following parameters can now be selected using
or
, after which the selection must be confirmed with
SET
:
• Channel 1 Unit
The parameter for this channel is selected.
Edit/select parameter with
or
, confirm with
SET
or abort
entry with
ESC
.
• Scale minimum for channel 1:
The lower scale limit is edited; Unit as selected above.
Editing the value: Scroll one digit to the right using
and
increase value of digit by 1 using
. Confirm with
SET
or abort
entry with
ESC
.
• Scale maximum for channel 1
The upper scale limit is edited;
Unit as selected above.
Editing the value: Scroll one digit to the right using
and
increase value of digit by 1 using
. Confirm with
SET
or abort
entry with
ESC
.
• Signal delay ("Attenuation") for channel 1
The analog signal can be delayed ("Attenuation"); a time
constant is selected for this (1 = no delay; 2-15 = delay in
seconds)
Edit/select parameter with
or
, confirm with
SET
or abort
entry with
ESC
.
2.
Continue to the main menu with
or
or return to Measuring
Mode with
ESC
.
4.4.6.2.
Editing Main Menu Alarm
With the alarm, the relays, available as options, are programmed.
In addition, the alarm statuses are shown on the display (top right)
(even without relays).
You can choose whether the alarm is to be used to monitor limit
values or as a collective alarm. If an alarm is to be used to monitor
limit values, you can choose between monitoring the minimum or
maximum value and set a limit value and hysteresis for each alarm.
Содержание 6351
