TESTO 6321, Инструкция по эксплуатации

Страница: 28 / 40

5 Parameterizing, adjusting and analyzing software (P2A software)
28
Pos: 50 /TD/Produkt verwenden/MUF 63xx/P2A/Parameter kopieren/einfügen @ 3\mod_1234358826054_79.doc @ 24360 @ 4
5.3.2.5. Copying and pasting parameters
The parameters of a parameter file can be transmitted to an
instrument file or another parameter file from the same instrument
type.
1.
Select file from which parameters are to be copied.
2. Click on Edit > Copy in the menu bar.
3. Select the file which is to be modified.
4. Click on Edit > Paste in the menu bar.
-
The parameters are transmitted to the file.
You can also use the common keyboard shortcuts for
copying (CTRL+C) and pasting (CTRL+V).
Parameters can also be transmitted using drag & drop,
where you drag the icon of the parameter file onto the icon
of the target instrument file.
5. Connect and select corresponding instrument.
6. Click on [Change parameterization] .
7. Confirm confirmation request.
- Parameter data are transferred to the instrument.
Pos: 51 /TD/Produkt verwenden/MUF 63xx/P2A/Geräte-/Parameterdatei löschen @ 3\mod_1234359025194_79.doc @ 24379 @ 4
5.3.2.6. Deleting instrument/parameter file
Instrument/parameter files can be deleted from the file list.
1.
Click on the file that is to be deleted with the right mouse button.
2. Select the command Delete in the context menu.
- The instrument or parameter file is deleted from the list.
Pos: 52 /TD/Überschriften/MUF/x.x.x Messumformer analysieren / testen @ 3\mod_1237380874787_79.doc @ 29928 @ 3
5.3.3. Analyzing/testing the transmitter
Pos: 53 /TD/Produkt verwenden/MUF 63xx/P2A/Messumformer analysieren/testen 632x @ 3\mod_1242139284458_79.doc @ 32824 @ 4
In this section, you can test the outputs of the connected
instrument, read off the limit values and reset the parameters to the
factory settings.
The function is only available for instrument files.