EN
Owner’s manual
56
Notes:
•
For safety reasons, please be sure to remove the 2in1 tank when the appliance is being
charged or left unused.
•
Please do not mop the carpet. Set a forbidden area in the app to prevent the appliance from
entering the carpet.
•
Prior to mopping, make sure the floor is well vacuumed.
•
To add water or clean/replace the mopping cloth when the appliance operates, please
pause it by pressing the appropriate button and take out the 2in1 tank by pressing down
the release button and slide it out. Afterwards, reassemble the tank according to the step
number 4. Do not move or turn over the appliance so as to avoid failing in positioning and/
or losing the map.
•
Mopping function is intended for wiping and is a good start for deep cleaning. It cannot
remove stubborn stains effectively and replace traditional mopping.
6. Use the remote control (
button) or go to mobile
app to set the water dripping speed. Set to [Dry tow] so
that the water will not be drawn from the water tank.
7. Only sweep the floor (2in1 tank must be installed)-
clean without mopping.
Note:
Prior to cleaning make sure the appliance is turned off.
1. Main brush
Clean it regularly.
1. Turn over the appliance, press the buckles on the main
brush guard, remove the guard and take out the main
brush.
2. Clean the main brush compartment and shaft; remove
any hair, debris or threads which have been entangled
around the shaft.
3. Clean the main brush and remove any hair which have
been entangled around it.
4. Reassemble the main brush and its guard. They are
installed correctly if you hear a clicking sound.
Note:
Main brush is available to be purchased online at www.teesa.pl or www.rebelelectro.com.
2. Side brushes
Clean them regularly.
1. Turn over the appliance and pull out the side brushes upwards.
2. Clean them from any hair, debris or threads which have been entangled around the shaft.
The side brushes can be rinsed under running water. In such case, always make sure to dry
them completely.
CARE AND MAINTENANCE
