EN
Owner’s manual
50
Errors
During cleaning, the appliance may encounter different problems. When that happens the
appliance will stop, LED indicators will flash red for a few times and the appliance will issue
a voice notification describing possible problem. Go to Errors section down below to solve
that problem.
Manual navigation:
If you want the appliance to go to the specific place in the room, use
manual navigation.
Remote control:
•
Keep the button pressed, so that the appliance will move forward.
•
Use buttons to turn left/right.
Mobile app: Go to [More] – [Manual mode].
•
Tap the to make the appliance move forward.
•
Tap the to turn left/right.
•
If you tap the , the appliance will start automatic cleaning.
Local cleaning
Take the appliance to the place you want to be cleaned. Press and hold the local cleaning
button on the appliance for about 3 seconds. The appliance will issue a voice notification
and start cleaning within the scope of 2 m x 2 m. The appliance will do the cleaning twice.
Afterwards it will return to the charging dock.
Spot cleaning
App:
Tap [Spot] on the app’s main screen. Tap the place on the map you want to clean- a tag
will appear there. Tap
; the appliance will automatically drive to the vicinity of that point,
take the point as the center and clean within 1,5 m x 1,5 m. The appliance will do the cleaning
twice. Afterwards it will return to the charging dock.
Remote control:
Press the
button. The appliance will start spot cleaning from the place it
is currently in.
Note:
Suction power in that mode will be automatically set to strong.
Area cleaning
(via app)
Set the area you want to be cleaned.
Tap [Area] on the app’s main screen, then select [Create
area]. A square will appear on the map. Tap and hold
it and move it to the place on the map you want to be
cleaned and set the desired size of that area. If you want
to add another area, tap [Create area] again. When all
is set, tap
. The appliance will move to the set area,
clean it once and return to the charging dock afterward.
If there is more than one area set, the appliance will clean
them one by one and when all areas are clean, it will
return to the charging dock.
If you want to delete an area, tap it and select
X
.
