EN
Owner’s manual
40
INSTALLATION
Side brushes
1. Make the left side brush (L) and the right side brush (R) correspond to L and R on the
bottom casing.
2. Press the L and R side brushes
into corresponding slots until
they lock in place. If you hear
a clicking sound that means
that the brushes have been
installed correctly.
Charging dock
1. Remove the cover at the bottom of the charging dock.
2. Connect the plug of the AC adapter to the power socket and put the excess cable inside
the compartment. Afterwards, reattach the cover.
If the excess cable will not be put into the slot, the appliance may stuck during
charging or cleaning.
Make sure charging dock is ALWAYS plugged in. Otherwise, the appliance will not
return to the dock automatically.
3. Place the charging dock against the wall on a floor and connect the AC adapter to the
power outlet.
Notes:
•
Ensure a space of above 0,5 m on both sides of the
charging dock and a space of above 1,5 m in the
front. Make sure that space will be easily accessible
for the appliance.
•
Make sure the cable of the AC adapter is not
lying flat on the floor as it may be dragged by the
appliance and consequently the charging dock
may be powered off.
•
LED indicator on the charging dock is on when the
charging dock is plugged in.
4. Please do not move the charging dock arbitrarily and keep it out of direct sunlight.
Notes:
•
If the charging dock is relocated, the appliance may fail in positioning and lose the map. When
restarted, the appliance will rebuild and memorize the map again and that rebuilt map may lose
cleaning information of forbidden areas and other areas.
•
Direct sunlight will interfere with recharging signal and consequently the appliance may be unable
to return to the charging dock.
Clean the charging pins of the charging dock regularly to avoid malfunction.
more than 1,5 m
more than 0,5 m
more than 0,5 m
