Owner’s manual
57
EN
3. When the side brushes are clean and dry, push them onto the shaft until you hear a click
(always match the symbol L and R on the brush to correspond to the position of L
and R at the bottom of the appliance respectively)
.
4. If the side brushes are worn and as a consequence cleaning performance deteriorates,
replace them with new ones*.
* One extra pair of side brushes is included in the set. Side brushes are available to be purchased online
at www.teesa.pl lub www.rebelelectro.com
3. Dustbin and filters
1. Press the dustbin release button and open it. Empty
the dustbin and clean it. You can rinse it under
running water. Wipe it well with a soft cloth or let it dry
completely in the shade.
Note:
Empty the dustbin after each use.
2. Remove the preliminary filter. Rinse it under running
water. Afterwards, let it dry completely in the shade.
3. When the dustbin and preliminary filter are clean and
completely dry, reassemble the filter and close the
dustbin.
4. Open the filter cover and remove HEPA and sponge filter.
Gently tap out dirt. If heavily soiled, rinse them under
running water. Afterwards, let them dry completely in
the shade.
•
It is recommended to clean the filters every 3 weeks.
•
HEPA filter can be washed under running water up to 50 times.
•
The maximum lifespan of the HEPA filter is 12 months. When
that time passes, replace it with a new one. Replace it also when
you notice significant deterioration in cleaning performance.
•
HEPA filter is available to be purchased online at www.teesa.pl
or www.rebelelectro.com.
5. When the filters are clean and completely dry, put them
back into place and close the filter cover until it locks in
place (make sure you hear a click).
Preliminary filter
Sponge filter
HEPA filter
