Tesmec FRB616, Руководство по установке, эксплуатации и техническому обслуживанию

Страница: 23 / 102

TENSIONER
Model: FRB616
Manual: MI-FRB616-020-01-GB Date: 11.03.2015 Author: M. Colleoni Page: 20 of 33
Prior to operate the set-up of the machines, check that:

The machines are connected through the special connecting cable

The ground devices are installed and connected
5.2 MACHINES SET-UP
Before the use the machine must be set in connected mode by assign to each machine the correct ID
number, starting from left to right, as described in the previous chapter.
a. insert and turn the ignition key (table 4
, pos. 1) in “1” position
b. wait up to the multifunction display switch on (table 4, pos. 19)
c. on the electronic multifunction display press the (

) key
d. on the screen pa
ge “MACHINE ID:” set the correct number by using the up ( 
) or down (

) key
press the return key (

) to save the settings
NOTE: the ID of the machines
must be set from 1 to the total
number of connected machines
starting from left to right (looking
at the machines from the back
–
reel-winder position)