10
Initial operation
After finishing the wiring press the button
ON/OFF
on the control panel. All LED’s flash one after
another, at last the LED
GET UP
. It shows the correct wiring. Press again
ON/OFF
to switch off the
system and start the next chapter. In case another LED is on please see chapter malfunctions.
Adjusting of limit switches
The jacks are equipped with adjustable limit switches.
The point of switching-off must be adjusted correctly at every jack to avoid the motor of the jack
is still running when it cannot move anymore. Start now with a special function:
Switch over to „calibration mode“:
Press button
ON/OFF
to start the system.
Directly after while the LED procedure is running press the 4 arrow buttons at once and hold them until the
LED
MANUAL
lights up. Release the buttons. Press again the button
MANUAL
and the arrow buttons are
constantly lighted.
In this mode the jacks can be moved separately up and down to adjust the limit switches. Pressing one
arrow button the corresponding jack runs
up
to driving position. Pressing
MANUAL
and one arrow button
the corresponding jack runs
down
.
Start now the adjustment of the jacks.
ON /OFF
JACK 1
JACK 3
MANUAL
JACK 2
JACK 4
Содержание Auto lift system
Страница 21: ......
