TESA Auto lift system, Руководство по установке и эксплуатации

Страница: 17 / 21

17
Remote control
Signalisation of alarms
Alarm overload (LED 19)
In case of overload of one or more jacks the LED 19 lights up together with one LED
10-11-12-13. It shows which jack is in overload position.
This LED can also be lighted if one of the jacks is at the end of stroke. In this case the
jack is blocked and only the function
GET UP is available.
Alarm a high inclination (LED 20)
This LED lights up if the incline of the vehicle is more than the jacks can balance.
Pressing AUTO the systems tries the best possible position, but the correct level
cannot be guaranteed.
Alternatively the function MANUAL can be used in order to reach a
better level.
START AUTO GET-UP
The main functions can be operated outside with the remote control. So you have eye
contact to the working jacks, you can control the floor conditions and set spacers.
Only the functions START – AUTO – GET-UP are available, other functions must be
operated at the control panel.
START AUTO GET-UP