Copyright Tes Drying Systems, 2014
20
DATA CHARTING:
The E-TES SD now has the ability to measure and store data regarding the operating status of the unit and the
environmental conditions during the drying process. The E-TES SD will hold up to one month of continuous
operational data. The Charter data is sorted by the serial number of each unit and each job is given a file number so
one USB Flash Drive can be used for multiple E-TES SD units.
Always check & set the date & time on the E-TES SD display before each job. (See Page 13)
Starting a job with an incorrect date or time setting may create a corrupt job file and prevent the data from
being downloaded or accessed.
Optional E-TES SD Charter Software is required to download, read and graph the data log information.
The Charter software is available to download free online at tesdryingsystem.com.
The E-TES SD job data can be retrieved by inserting a removable data storage device such as a Flash Drive or
Memory Stick into the USB port on front panel. After inserting the flash drive into the USB port, turn the power
switch ON to log data from the E-TES SD unit. When Flash Drive stops flashing, and the
Updating USB - Do
Not Remove
screen is no longer showing, turn the switch off and remove the Flash Drive. Flash Drive can then
be connected to the USB port on your computer to download the data.
The E-TES SD Charter software will allow you to compile reports for insurance adjusters or homeowners to
support your drying procedures and billing. On the E-TES Charter preview screen you can modify the graph by
clicking on the keys at the bottom of the screen to add or delete different data you want displayed on your graph.
The job can be named and data is exported to Excel to create job files, graphs and reports. Multiple job files can be
joined to create a new single job file for reports.
DATA RETREIVED USING A REMOVABLE USB
MEMORY DEVICE
E-TES Charter Preview Screen
