Copyright Tes Drying Systems, 2014
12
Moisture 1 Value Screen:
This tells you the current reading of the Moisture probe if it is
connected to the E-TES SD or the default value of 00% if the probe is not connected.
Moisture 2 Value Screen:
This tells you the current reading of the Moisture probe if it is
connected to the E-TES SD or the default value of 00% if the probe is not connected.
Humidity / Internal Temperature Screen:
This tells you the relative humidity percentage
and temperature inside the E-TES SD box.
Remote Setup Screen:
This allows you to set temperature at which the E-TES SD will turn
on Remote Exhaust Controller. (Remote Air Temperature Sensor to operate remote control.)
•
Press
UP
to return to Moisture 1 Value Screen
•
Press
DOWN
to move to Humidity / Internal Temperature
Screen
Press
SELECT
to set Moisture Probe shutdown
percentage. Use
UP/DOWN
to change moisture
percentage level set point.
•
Press
DOWN
to move to Remote Setup screen
•
Press
UP
to return to Moisture 2 Value screen
Press
SELECT
to set the E-TES Remote Exhaust
Controller turn on temperature. Use
UP/DOWN
to
change temperature.
•
Press
DOWN
to move to Air Flow Setup Screen
•
Press
UP
to return to Humidity Internal Temperature Screen
•
Press
DOWN
to move to Moisture 2 Value Screen
•
Press
UP
to return to Surface Temp Screen
Press
SELECT
to set Moisture Probe shutdown
percentage. Use
UP/DOWN
to change moisture
percentage level set point.
UNIT WILL NOT SHUTOFF IF SET BELOW 10%
UNIT WILL NOT SHUTOFF IF SET BELOW 10%
