User Manual for BX40C GNSS Board v2.0
32
3) Select NTRIP client for input type, click the Opt button for NTRIP, and fill all
the five fields for NTRIP client configuration.
Figure 5.7 NTRIP Client configuration
4) If needed, draft position of the receiver is input, refer to the following figure.
Figure 5.8 Draft position of the receiver
5) Go back to the main page, and click [Start]. If everything is OK the following
page will be shown. The input and output data will increase with time. And
the position type of the receiver can be checked in Tersus GNSS Center
