User Manual for BX40C GNSS Board v2.0
11
When BX40C board is handled, follow the guides below to avoid
damage from ESD.
Always wear a properly grounded anti-static wrist strap when
handling BX40C board.
Always hold the board by the corners or the RF shield: avoid direct
contact with any of the components.
Never let the board come in contact with clothing. The ground strap
cannot dissipate static charges from fabrics.
Failure to follow accepted ESD handling practices could cause
damage to the board permanently.
The warranty may be void if equipment is damaged by ESD.
2.6 Tersus GNSS Center Software
BX40C receiver has serial ports, hence lots of serial tools can be used to
communicate
with
the
receiver.
Tersus
GNSS
Center
is
a
windows-platform-based serial tool, which is recommended to communicate
with the BX40C receiver. Tersus GNSS Center can be downloaded from
Tersus website
https://tersus-gnss.com/software
.
Connect BX40C to a laptop/PC with an external cable. Run Tersus GNSS
Center, the following config page is shown, input the port and band rate
(default is 115200).
