User Manual for BX40C GNSS Board v2.0
30
5.2 Download Files from Internal eMMC
The files saved on the internal eMMC chip can be copied to the computer via a
USB port. Detailed steps to download files from eMMC chip are as follows:
1) Create a connection between a BX40C receiver and a computer via the
cables below. Connect the COMM2 port of a BX40C receiver to the USB
port of a computer using COMM2-7pin to USB & DB9 cable and DB9 Male
to USB Type A Male converter cable.
Figure 5.1 COMM2-7pin to USB & DB9 Cable
Figure 5.2 DB9 Male to USB Type A Male converter cable
2) Power on the BX40C receiver
3) A GNSS_U disk will display on the computer.
4) Open the GNSS_U disk and there are two folders
：
inner and user.
5) Copy the inner and user folders to see the related information from eMMC.
