User Manual for BX40C GNSS Board v2.0
17
3.2 Firmware Update Using Tersus GNSS Center
Please follow the steps below to upgrade the firmware.
1) Power on the BX40C GNSS receiver;
2) Run Tersus GNSS Center software and communicate with the receiver,
refer to section 2.6 for details. Make sure the receiver has finished
initialization, which can be confirmed by input ‘LOG VERSION’ in the
console window and the receiver will output feedback;
Figure 3.1 Main interface of Tersus GNSS Center
3) Click Stop button as shown below to terminate the communication
between the computer and the receiver;
