User Manual for BX40C GNSS Board v2.0
13
Figure 2.2 Main Windows of Tersus GNSS Center
!
To active the skyplot, signal strength, trajectory and other windows,
the antenna signals must be received and the following three loggings
must be input to the receiver:
LOG GPGGA ONTIME 1
// output position and time
LOG GPGSV ONTIME 1
// output SVs in view, elevation and SNR
(Signal Noise Ratio)
LOG RNAGEB ONTIME 1
// output PSR (Pseudorange) and ADR
(Accumulated Doppler Range.)
refer to
Log & Command Reference document
for details.
