User Manual for BX40C GNSS Board v2.0
21
Figure 3.7 Advance setting for firmware update
If the [Advance Setting] is selected, the following page will be displayed, select
[Manual Hardware Reset] and click [OK]. Click [Next] in the previous interface,
power off the receiver, wait for five seconds and power on the receiver again.
Figure 3.8 Advance Update Setting
After firmware update is finished, power off the receiver, wait for five seconds
and power on the receiver again.
This option is for experienced users. If the customer is not sure
whether it should be selected, contact Tersus technical support
before select this option.
