Termofor Battery Fire 11, Руководство пользователя

Страница: 6 / 20

5. STOVE STRUCTURE
All « Battery-Fire » models have the same structure. They differ only in the number of slot convectors and, as a
result in stove length. The main elements location is exemplified by "Battery-Fire 7Á " in Figure 9.
The stove body has an originally shaped, fully welded design. The stove firebox (6) is made of structural steel, 3
mm thick.
The deflector (3) separates the firebox room from the fuel stack.
The convector slotted panels
(11) on the stove sides shield hard infrared radiation from the stove and
accelerate the ambient air heating. Their original design allows "Battery-Fire" stove to be fitted in with any modern
interior.
In the version «WT» the heat exchanger tank (12) is installed at the rear of the firebox (inside) to heat water
for domestic use. Water heating system male connectors G3/4 extend through the rear convector .
High vertically oriented firebox door is opened at an angle of 120 ° that allows you to top up the stove with
wood easily.
The firebox door (4) has a cavity with a gasket mounted therein to press the door tightly to the stove body.
Locking mechanism securely locks the door in the closed position by turning the handle. On the door there is a
translucent
wall made of heat resistant glass « SCHOTT ROBAX » (5).
When firing , primary air required for burning is supplied to the fuel through the ash drawer (8) door left ajar
and cast iron grate (13) to provide supplemental firing a nd a powerful high-temperature flame at the moment of
ignition .
ATTENTION! The stove is designed to operate only in smouldering conditions . Never use the stove in open
fire conditions (open flame is permitted only with firing ; prolonged active burning cond itions reduce the
stove service life ).
For the further stove operation the air required for burning is supplied through the fine adjustment valve (7)
under the firebox door that allows you to choose any mode of the stove operation , from nominal to minimum ,
steplessly .
Table 5 . « Battery-Fire 11» and « Battery-Fire 11WT» specifications
Figure 8. « Battery-Fire 11WT» overall dimensions
with a fuel stack installed backwards.
Figure 7. « Battery-Fire 11WT» overall dimensions
with a fuel stack installed upwards.
O120
370
55
6
76
0
930
850
780
2
50
370
65
5
7
6
0
930
850
780
O
12
0
6
6
0
Models «Battery-Fire 11 » «Battery-Fire 11WT »
Heated space capacity, max. cu.m. 25 0 25 0
Nominal power , kW 1 6 1 6
Overall dimensions ( WDH ), mm 370? 930 ? 760 370? 930 ? 760
Weight , kg 72 75
Firebox door opening , mm 150? 300 150? 300
Combustion chamber capacity , l 76 73
Fuel maximum amount , l 71 68
Firewood length , max ., mm 670 650
Flue diameter , mm 120 120
Flue recommended height , m 5 5
Heat exchanger tank capacity , l - 1,3