In case of door translucent wall
(glass)
damage you should replace
it (see. Figure 15):
1
.
Remove the 6 screws securing the frame (Figure 17).
2
.
Remove the frame with the glass remnants. Be careful
, glass pieces may fall and cause personal injury.
3
.
Set the new glass with attached tape into the frame
.
The tape on the glass must be attached as shown in
Figure 18.
4
.
Secure the frame with glass to
the door with screws.
Paint coating damage during operation may cause
corrosion, which is not covered by warranty. To avoid this,
the manufacturer recommends
that you should touch-up the body with heat-resistant organosilicone enamel with
heat resistance of at least 600
° C.
Warranty period for the product is 12 months from the date of transfer it to the Consumer.
If the Consumer finds an inadequacy in the stated specifications (features) of the Products, the Consumer will
have the right to address his Claim to the organization (the Client) which has sold these Products.
Herewith, the Client has right to address to the Manufacturer that settle the Claim.
If an identified misstatement is satisfied the following conditions, the Manufacturer will make reworking the
Products integrally or its unit (in accordance with decision of the Manufacturer), substituting a damaged unit or its
elements, free of charge or compensating for damage by other means (with the approval of the Consumer):
1) It has established that a defect is in 12 months from the date of transfer the Products to the Consumer;
2) It has established that a defect is due to the fault of the company «Termofor».
Warranty doesn't apply to the Products and also its units or elements which have been changed by the
Consumer. Warranty doesn't apply to elements of the Products which shall be substituted at the time of normal
operation.
The Manufacturer doesn't give warranty to the products if the Consumer wouldn't fulfill the requirements of
the Maintenance manual.
If the Consumer (a person who has installed the product) wouldn't follow the technical requirements of
products installation and operation it leads to release of the Manufacturer from liability.
Warranties are ended from the time of determine of conditions stated above and in the future will not be
renewed.
The product shall be kept in the pack in accordance with GOST (ÃÎÑÒ) 15150-69, group 3 (enclosed premises
with a free ventilation without artificially adjustable climate conditions) at a temperat
ure from -60 till +40
?
C and
relative air humidity no more than 80% (at a temperature of +25
?
C).
In air of a premise of storing the product shalln't be aggressive substances (acid fumes, alkalies).
Storage requirements concern to storehouses of the Consigner and the Consumer.
An expiration date of the product in a consumption package without reconservation is no more than 12
month.
10. WARRANTY
1
1
. STORING
Glass
Frame
Self-drilling
screw
Sealing cord
Figure
17. «
Battery-Fire
» stove door
Glass
Sealing cord
Figure18.
«
Battery-Fire
» door glass
Bottom
Top
Содержание Battery Fire 11
Страница 1: ...Battery Fire USER MANUAL ...
