Terex Genie S-60 DC, Руководство по обслуживанию и ремонту

Страница: 45 / 171

July 2021 Service and Repair Manual
Boom Components
Part No. 1299608GT S ® -60 DC • S ® -60 FE 33
14 Tag, disconnect and plug all hydraulic hoses
that enter the cable track from the bulkhead
fittings at the pivot end of the boom.
Bodily injury hazard. Spraying
hydraulic oil can penetrate and
burn skin. Loosen hydraulic
connections very slowly to allow
the oil pressure to dissipate
gradually. Do not allow oil to
squirt or spray.
15 Pull the hydraulic hoses out of the primary
boom.
16 Remove the cotter pin from the upper cable
track at the platform end of the boom.
Note: Always replace the cotter pin with a new
one.
17 Remove the cable track pull tube guide
fasteners from the cable track guide at the
platform end of the boom. Remove the cable
track guide from the boom.
18 Place blocks in between the upper and lower
cable tracks and secure the upper and lower
tracks together.
Crushing hazard. If the upper
and lower cable tracks are not
properly secured together, the
cable track could become
unbalanced and fall when
removed from the machine.
19 Attach a lifting strap from an overhead lifting
device to the cable track.
20 Remove the mounting fasteners that attach
the lower cable track to the boom.
21 Carefully remove the cable track from the
machine and place it on a structure capable of
supporting it.
Crushing hazard. The cable
track could become unbalanced
and fall if not properly attached
to the lifting device.
Component damage hazard.
Cables and hoses can be
damaged if they are kinked or
pinched.
Component damage hazard. The
cable track can be damaged if it
is twisted.