Terex Genie GS-2669DC Скачать руководство пользователя

Страница: 52 / 60

Operator's Manual

Second Edition • Second Printing

Transport and Lifting Instructions

™

-2669DC • GS

™

-3369DC • GS

™

-4069DC

Part No. 1305659GT

Transport and Lifting Instructions

Observe and Obey:



Genie provides this securement information as

a recommendation. Drivers are solely

responsible for making sure machines are

properly secured and the correct trailer is

selected.



Genie customers needing to containerize any

lift or Genie product should source a qualified

freight forwarder with expertise in preparing,

loading and securing construction and lifting

equipment for international shipment.



Only qualified mobile elevating work platform

operators should move the machine on or off

the truck.



The transport vehicle must be parked on a

level surface.



The transport vehicle must be secured to

prevent rolling while the machine is being

loaded.



Be sure the vehicle capacity, loading surfaces

and chains or straps are sufficient to withstand

the machine weight. Genie lifts are very heavy

relative to their size. See the serial label for

the machine weight.



The machine must be on a level surface or

secured before releasing the brakes.



Do not drive the machine on a slope that

exceeds the uphill, downhill or side slope

rating. See Driving on a Slope in the Operating

Instructions section.



If the slope of the transport vehicle bed

exceeds the maximum slope rating, the

machine must be loaded and unloaded using a

winch as described in the brake release

operation.

Free-wheel Configuration for

Winching

Chock the wheels to prevent the machine from

rolling.

All models: Release the

wheel brakes by turning

over the two rear torque

hub disconnect caps.

Be sure the winch line is

properly secured to the

drive chassis tie points

and the path is clear of

all obstructions.

Reverse the procedures described to re-engage

the brakes.
Chock the wheels to prevent the machine from

rolling.

Содержание Genie GS-2669DC





























































Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды

Terex Genie GS-2669DC, Руководство оператора

Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды