Terex Genie GS-2669DC Скачать руководство пользователя

Страница: 35 / 60

Second Edition • Second Printing

Operator's Manual

Inspections

Part No. 1305659GT

™

-2669DC • GS

™

-3369DC • GS

™

-4069DC

Test the Tilt Sensor Operation

Note: Perform this test from the ground with the

platform controller. Do not stand in the platform.
43  Fully lower the platform.
44  Place a 2x4 or similar piece of wood under

both wheels on one side and drive the

machine up onto them.

45 Raise the platform approximately 7 ft / 2.13 m.

Result: The platform should stop and the tilt

alarm will sound at 180 beeps per minute. The

platform controls LED readout should display

LL and the ground controls LCD should

display LL: Machine Tilted.

46 Press the drive function button (if

equipped).

47 Press and hold the function enable switch on

the control handle.

48 Move the control handle in the direction

indicated by the blue arrow, then move the

control handle in the direction indicated by the

yellow arrow.

Result: The drive function should not work in

either direction.

49 Lower the platform and remove both pieces of

wood.

Test Elevated Drive Speed

50 Raise the platform approximately 4 ft / 1.2 m

from the ground.

51 Press the drive function button (if

equipped).

52 Press and hold the function enable switch on

the control handle.Slowly move the control

handle to full drive position.

Result: The maximum achievable drive speed

with the platform raised should not exceed

0.44 ft / 13 cm per second.

If the drive speed with the platform raised exceeds

0.44 ft / 13 cm per second, immediately tag and

remove the machine from service.

Содержание Genie GS-2669DC





























































Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды

Terex Genie GS-2669DC, Руководство оператора

Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды