Terex Genie GS-2669DC Скачать руководство пользователя

Страница: 45 / 60

Second Edition • Second Printing

Operator's Manual

Operating Instructions

Part No. 1305659GT

™

-2669DC • GS

™

-3369DC • GS

™

-4069DC

To Retract Outriggers

1 Press the outrigger function

button.

2 Press and hold the function enable switch on

the control handle.

3 Move the control handle in the direction

indicated by the blue arrow.

Release the control handle once the outriggers are

off the ground. After approximately 5 seconds, the

outrigger indicator lights will turn off. All functions

are now restored.
Note: If the outrigger enable and retract buttons

are released too soon during retraction, the

outrigger indicator lights will flash green, indicating

the outriggers are not fully retracted.

To Steer

1 Press the drive function button. On the LCD

screen, a circle below the drive function

symbol will turn on.

If the control handle is not moved within seven

seconds of pushing the drive function button, the

circle below the drive function symbol will turn off

and drive function will not operate. Press the drive

function button again.

2 Turn the steer wheels with the

thumb rocker switch located on

the top of the control handle.

To Drive

1 Press the drive function button. On the LCD

screen, a circle below the drive function

symbol will turn on.

If the control handle is not moved within seven

seconds of pushing the drive function button, the

circle below the drive function symbol will turn off

and drive function will not operate. Press the drive

function button again.
2 Press and hold the function enable switch on

the control handle.

3 Increase speed: Slowly move the control

handle off center.
Decrease speed: Slowly move the control

handle toward center.
Stop: Return the control handle to center or

release the function enable switch.

Use the color-coded direction arrows on the

platform controls and on the platform to identify the

direction the machine will travel.
Machine travel speed is restricted when the

platform is raised.
Battery condition will affect machine performance.

Machine drive speed and function speed will drop

when the battery level indicator is flashing.

Содержание Genie GS-2669DC





























































Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды

Terex Genie GS-2669DC, Руководство оператора

Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды