Terex Genie GS-2669DC Скачать руководство пользователя

Страница: 27 / 60

Second Edition • Second Printing

Operator's Manual

Controls

Part No. 1305659GT

™

-2669DC • GS

™

-3369DC • GS

™

-4069DC

11 Platform up OR outrigger retract button

Press and hold this button and the

platform will raise OR the

outriggers will retract.

12 Platform down OR outrigger extend button

Press and hold this button and the

platform will lower OR the

outriggers will extend.

13 Outrigger indicator lights

During outrigger extension,

lights flash green. As each

outrigger contacts the ground,

lights turn solid green. Any

time the outrigger extension

procedure is interrupted, the

lights will flash green

indicating the outriggers are

not contacting the ground or

the outriggers are not fully

deployed. During outrigger

retraction lights turn solid

green. As each outrigger fully

retracts, lights turn off. Lights

will turn solid red, indicating

the corresponding outrigger is

at end of stroke.

14 Lift function button

Push this button to activate the lift

function.

15 Proportional control handle and function

enable switch for drive, steer, lift and outrigger

functions
Lift function: Press and hold the function

enable switch to enable the lift function on the

platform control handle. Move the control

handle in the direction indicated by the blue

arrow and the platform will raise. Move the

control handle in the direction indicated by the

yellow arrow and the platform will lower. The

descent alarm should sound while the platform

is lowering.
Drive function: Press and hold the function

enable switch to enable the drive function on

the platform control handle. Move the control

handle in the direction indicated by the blue

arrow on the control panel and the machine

will move in the direction that the blue arrow

points. Move the control handle in the direction

indicated by the yellow arrow on the control

panel and the machine will move in the

direction that the yellow arrow points.
Outrigger function: Press and hold the function

enable switch to enable the outrigger function

on the platform control handle. Move the

control handle in the direction indicated by the

blue arrow and the outriggers will retract.

Move the control handle in the direction

indicated by the yellow arrow and the

outriggers will extend.

Содержание Genie GS-2669DC





























































Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды

Terex Genie GS-2669DC, Руководство оператора

Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды