Terex Genie GS-2669DC Скачать руководство пользователя

Страница: 19 / 60

Second Edition • Second Printing

Operator's Manual

Work Area Safety

Part No. 1305659GT

™

-2669DC • GS

™

-3369DC • GS

™

-4069DC

Collision Hazards

Be aware of limited sight

distance and blind spots

when driving or operating.

Be aware of extended platform position when

moving the machine.
The machine must be on a level surface or

secured before releasing the brakes.
Operators must comply with employer, job site,

and governmental rules regarding use of personal

protective equipment.

Check the work area for

overhead obstructions or

other possible hazards.

Be aware of crushing

hazards when grasping

the platform guard rail.

Observe and use color-coded direction arrows on

the platform controls and the platform decal plate

for drive and steer functions.

Do not lower the platform

unless the area below is

clear of personnel and

obstructions.

Limit travel speed

according to the condition

of the ground surface,

congestion, slope,

location of personnel, and

any other factors which

may cause collision.

Do not operate a machine in the path of any crane

or moving overhead machinery unless the controls

of the crane have been locked out and/or

precautions have been taken to prevent any

potential collision.
No stunt driving or horseplay while operating a

machine.

Содержание Genie GS-2669DC





























































Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды

Terex Genie GS-2669DC, Руководство оператора

Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Похожие инструкции для Genie GS-2669DC

Бренды по названию

Популярные бренды