Terex Genie GS-2669DC Скачать руководство пользователя страница 24

Страница: 24 / 60

Operator's Manual

Second Edition • Second Printing

Controls

™

-2669DC • GS

™

-3369DC • GS

™

-4069DC

Part No. 1305659GT

Controls

The ground control station is to be used as a means to raise the platform for function tests and for storage

purposes. The ground control station can be used in the event of an emergency to rescue an

incapacitated person in the platform.

Ground Control Panel

1 Function enable toggle switch for auxiliary

lowering

2  Auxiliary lowering toggle switch
3  Menu enter button
4  Key switch for platform/off/ground selection

Turn the key switch to the platform position and

the platform controls will operate. Turn the key

switch to the off position and the machine will be

off. Turn the key switch to the ground position

and the ground controls will operate.

5 Red Emergency Stop button

Push in the red Emergency Stop button to the off

position to stop all functions. Pull out the red

Emergency Stop button to the on position to

operate the machine.

6 Menu down button
7 Alarm

8  7A breaker for controls circuit
9  15A breaker for controls circuit
10  Platform down button
11  Lift function enable button

Press and hold this button to activate the lift

function.

12  Platform up button
13  Menu escape button
14  Menu up button
15  LCD diagnostic readout
16  Load Sense LED display (see service manual for

details)

17 Load Sense Calibration switch (see service

manual for details)

18 Tech Pro Link Connector

Содержание Genie GS-2669DC





























































Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Бренды по названию

Популярные бренды

Terex Genie GS-2669DC, Руководство оператора

Результаты поиска

Содержание Genie GS-2669DC

Отзывы:

Бренды по названию

Популярные бренды