Terex Genie AL5HT, Руководство по обслуживанию

Страница: 47 / 94

May 2015 Service Manual
Checklist E Procedures
Part No. 1265482 AL5HT 37
10 Rinse out the inside of the reservoir using a
mild solvent.
11 Install the suction strainer.
12 Install the hydraulic reservoir onto the power
unit.
13 Install the hydraulic reservoir retaining
fasteners and securely tighten. Do not
overtighten.
14 Install the hydraulic power unit onto the
machine.
15 Fill the reservoir with hydraulic oil to within a
1/2" from the top with the cylinders collapsed.
16 Clean up any oil that may have spilled.
Properly discard the used oil.
17 Operate all machine functions through a full
cycle and check for leaks.
18 Operate all machine functions through
5-10 full cycles to fully remove air from the
system.
19 Make sure unit is in a clear area during steps
17 and 18 as air in the cylinders can cause
sudden movements of the tower.
E-2
Perform Engine Maintenance
Engine specifications require that this procedure be
performed every 3000 hours.
Required maintenance procedures and additional
engine information is available in the Kubota
D1105-E and V1505-E Operator's Manual (Kubota
16683-89169 part number ) OR the Isuzu 4LE1
Diesel Engine Owner's Manual (Isuzu part number
IDE-6033) OR the Isuzu 4LE2 Diesel Engine
Owner's Manual (Isuzu part number IDE-6450).
Isuzu 4LE1 Diesel Engine Owner's Manual
Genie part number 116133
Isuzu 4LE2 Diesel Engine Owner's Manual
Genie part number 1264609
Kubota D-1105 and V-1505 Operator's Manual
Genie part number 893020