Terex Genie AL5HT, Руководство по обслуживанию

Страница: 24 / 94

Service Manual May 2015
Maintenance Inspection Report
14 AL5HT Part No. 1265482
Model
Serial number
Date
Hour meter
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Instructions
•
Make copies of this report to use for
each inspection.
•
Select the appropriate checklist(s) for
the type of inspection(s) to perform.
Daily or every 8 hours A
Quarterly or every
250 hours
A + B
Semi-annually or
every 500 hours
A + B + C
Annually or
every
1000 hours
A + B + C + D
Two-year or
every
2000 hours
A + B + C + D + E
•
Place a check in the appropriate box
after each inspection procedure is
completed.
•
Use the step-by-step procedures in
this section to learn how to perform
these inspections.
•
If any inspection receives an "N," tag
and remove the machine from service,
repair and re-inspect it. After repair,
place a check in the "R" box.
Legend
Y = yes, acceptable
N = no, remove from service
R = repaired
Checklist C Y N R
C-1 Inspect tower
extend/retract cables
C-2 Engine maintenance
Perform every 6000 miles:
C-3 Axle maintenance
Perform after 750 hours:
C-4 Engine maintenance -
Isuzu models
Perform every 800 hours:
C-5 Engine maintenance -
Kubota models
Checklist D Y N R
D-1 Engine maintenance
- Kubota models
D-2 Generator
maintenance
D-3 Hydraulic filters
D-4 Engine maintenance
- Isuzu models
Perform every 1250 hours:
D-5 Engine maintenance
- Isuzu models
Perform every 1500 hours:
D-6 Engine maintenance
D-7 Generator
maintenance
Perform annually:
D-8 Tongue jack and
outrigger jack
maintenance
Perform every 12,000 hours:
D-9 Axle maintenance
Checklist E Y N R
E-1 Hydraulic oil analysis
Perform every 3000 hours:
E-2 Engine maintenance
Perform every 2 years:
E-3 Engine maintenance
Perform every 4500 hours:
E-4 Generator
maintenance
Perform every 15,000 hours:
E-5 Generator
maintenance
Comments