Terex Genie AL5HT, Руководство по обслуживанию

Страница: 63 / 94

May 2015 Service Manual
Kubota D1105-E / V1505-E Engine
Part No. 1265482 AL5HT 53
4-1
Timing Adjustment-Kubota
Engines
Complete information to perform this procedure is
available in the Kubota 05 Series Workshop
Manual (Kubota part number: 97897-02432).
Kubota 05 Series Workshop Manual
Genie part number 31742
4-2
Glow Plugs-Kubota Engines
1 Disconnect the wiring and buss bar from the
glow plugs.
2 Connect the leads from an ohmmeter between
each glow plug terminal and ground.
Result: The resistance should be
approximately 1 ohm.
Result: The resistance is 0 ohm or greater
than 1 ohm. The glow plug is faulty.
4-3
Coolant Temperature and Oil
Pressure Switches-Kubota
Engines
The engine coolant temperature switch is a
normally open switch. The switch contacts close at
approximately 225°F / 107°C. If the coolant
temperature rises above the switch point, the
switch contacts close and the engine will shut off to
prevent damage. The engine will not start until the
temperature drops below the switch point.
Additionally a low coolant level can cause the
coolant temperature switch to not work properly.
Make sure that the coolant system is at proper
level.
The engine oil pressure switch is a normally closed
switch. The switch contacts open at approximately
7 psi / 0.48 bar. If the oil pressure drops below the
switch point, the contacts open and the engine will
shut off to prevent damage.