Terex AL4L, Руководство по обслуживанию

Страница: 35 / 67

REV B
Section 3 • Scheduled Maintenance Procedures August 2016
Part No. 229171 AL4L • AL5L 3 - 21
Checklist C Procedures
C-1
Perform Engine Maintenance -
Kubota D1105-D3BG Models
Engine specifi cations require that this procedure
be performed every 500 hours or semi-annually,
whichever comes fi rst.
• Clean fuel tank
• Clean radiator
• Replace fan belt
Required maintenance procedures and additional
engine information is available in the
Kubota
D1105 Operators Manual (Kubota part number
16622-89166)
Kubota D1105 Operators Manual
Genie part number 131379
C-2
Clean the Light Assemblies
Terex specifi cations require that this procedure
be performed every 500 hours or semi-annually,
whichever comes fi rst.
Maintaining the light assemblies is essential to
good machine performance. Failure to regularly
clean the light assemblies may result in less light
than expected and, over time, could result in
damage to the machine.
Note: Perform this procedure with the light
assemblies out of direct sunlight and cool to the
touch.
1 Use clean, cool water to rinse the surface of
each light assembly.
2 Clean each light assembly using a soft cloth,
water and a mild dishwashing detergent.
NOTICE
Component damage hazard.
Harsh chemicals and cleaning
agents will damage the surface of
the light assembly. Do not allow
harsh cleaning agents to make
contact with the light surface.
3 Thoroughly rinse, then dry with a soft cloth.