Terex AL4L, Руководство по обслуживанию

Страница: 33 / 67

REV B
Section 3 • Scheduled Maintenance Procedures August 2016
Part No. 229171 AL4L • AL5L 3 - 19
20 Securely install the small rubber plug into the
brake backing plate.
21 Check for wheel bearing wear by attempting
to move wheel hub side to side, then up and
down.
Result: There is no side to side or up and down
movement. The bearing is good.
Result: There is side to side or up and down
movement. The bearing must be replaced.
22 Lift the axle slightly. Remove the jack stand and
lower the machine to the ground. Chock the
front and rear of the tire.
23 Repeat this procedure, beginning with step 2,
for the other wheel.
CHECKLIST B PROCEDURES
B-9
Inspect the Suspension
Axle specifi cations require that this procedure
be performed every 3000 miles or quarterly,
whichever comes fi rst.
Maintaining the axle suspension in good
condition is essential to safe operation and good
performance. Towing the machine with worn or
damaged suspension components could result
in a tip-over. Component damage may also result
if problems are not discovered and repaired in a
timely fashion.
1 Working with a fl ashlight or in a well lit shop,
carefully inspect all suspension components
and fasteners. Replace as necessary.