Tennant 443C, Руководство оператора

Страница: 5 / 24

SAFETY PRECAUTIONS
3
443C MM294 (10–91)
SAFETY PRECAUTIONS
The following symbols are used throughout this
manual as indicated in their description:
CAUTION: To warn of hazards or unsafe
practices which could result in minor
personal injury.
WARNING: To warn of hazards or
unsafe practices which could result in
severe personal injury or death.
FOR SAFETY: To identify actions which must
be followed for safe operation of equipment.
The following information signals potentially
dangerous conditions to the operator or
equipment. Read this manual carefully. Know
when these conditions can exist. Locate all safety
devices on the machine. Then, take necessary
steps to train machine operating personnel.
Report machine damage or faulty operation
immediately. Do not use the machine if it is not in
proper operating condition.
FOR SAFETY:
1. Do Not Operate, Maintain, or Service
Machine:
– Unless Trained And Authorized.
– Unless Operation Manual Is Read And
Understood.
– With Damaged Cord Or Plug.
– In Outdoor Areas.
– In Flammable Or Explosive Areas.
2. Before Operating Machine:
– Make Sure All Safety Devices Are In
Place And Operate Properly.
3. When Using Machine:
– Use Only TENNANT Attachments.
– Do Not Pull Machine By Plug Or Cord.
– Keep Cord Away From Heated
Surfaces.
– Do Not Unplug By Pulling On Cord.
– Connect To Properly Grounded Outlet
Only. See GROUNDING
INSTRUCTIONS.
– Do Not Close Door On Plug Or Pull
Cord Around Sharp Corners.
4. Before Leaving Or Servicing Machine:
– Turn Off Machine And Unplug Power
Cord From Outlet.
5. When Maintaining or Servicing Machine:
– Avoid Moving Parts. Do Not Wear
Loose Jackets, Shirts, Ties, Or Sleeves
When Working On Machine.
− Use TENNANT Supplied Or Equivalent
Replacement Parts.
WARNING: Hazardous Voltage. Shock
Or Electrocution Can Result. Unplug
Power Cord Before Working On Machine.
WARNING: Flammable Materials Can
Cause An Explosion Or Fire. Do Not
Use Flammable Materials In Solution Tank.
WARNING: Flammable Materials Or
Reactive Metals Can Cause An
Explosion Or Fire. Do Not Pick Up Flammable
Materials Or Reactive Metals.
CAUTION: Moving parts. Unplug Power
Cord Before Working On Machine.
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should
malfunction or breakdown, grounding
provides a path of least resistance for
electrical current to reduce the risk of electric
shock. This machine is equipped with a cord
having an equipment–grounding conductor
and grounding plug. The plug must be
plugged into an appropriate outlet that is
properly installed in accordance with all local
codes and ordinances.
FOR SAFETY: Connect To Properly Grounded
Outlet Only.
This machine is designed for use on a
nominal 120 volt circuit and has a grounding
plug that resembles the plug illustrated below.
Make sure the machine is connected to an
outlet having the same configuration as the
plug. No adaptor should be used with this
machine.
06572
GROUNDING PLUG
This product is intended for commercial use.