Tennant 443C, Руководство оператора

Страница: 16 / 24

OPERATION
443C MM294 (12–91)
14
6. To vacuum up the solution with the power
wand, turn the cleaning tool so the
squeegee side is facing down. Push and/or
pull the tool across the floor to pickup the
solution.
A
B
06602
HARD FLOOR WAND
A. Cleaning Tool
B. Squeegee
7. If the hard floor wand is difficult to push or
does not pickup the solution properly, adjust
the roller wheels on the tool by turning the
black adjustment knob.
A
B
06604
ADJUSTING ROLLER WHEELS
A. Adjustment Knob
B. Roller Wheels
8. The wheels are properly adjusted when the
squeegee blades deflect slightly while the
tool is pushed back and forth.
9. When finished, turn the VAC switch to OFF
and set the MODE switch to BRUSH AND
WATER (TOP) position.
10. Disconnect the vacuum and solution hoses
from the power wand.
11. Disconnect the solution hose from the
machine quick-disconnect.
12. Remove the power wand vacuum hose from
the solution tank and install the vacuum
hose you removed earlier.