Tennant 443C, Руководство оператора

Страница: 15 / 24

OPERATION
13
443C MM294 (12–91)
OPTIONS
POWER WAND
The power wand uses the vacuum system and
solution system of the machine. The wand allows
scrubbing of floors which are out of reach of the
machine.
1. Attach the male end of solution hose to the
female quick-disconnect on the machine.
Push the male connector in until it stops.
Pull on the hose to make sure it is
connected.
B
A
06634
CONNECTING SOLUTION FEED HOSE
A. Male Quick-Disconnect
B. Female Quick-Disconnect
2. Pull the vacuum hose off the solution tank,
and firmly insert the hose cuff from the
power wand hose into the tank.
A
B
06816
CONNECTING ATTACHMENT HOSE
A. Wand Attachment Hose
B. Solution Tank
3. Attach the other ends of the solution and
vacuum hoses to the power wand tool in the
same way.
A
B
C
D
06598
CONNECTING ATTACHMENT
A. Solution Hose Quick-Disconnect
B. Vacuum Hose
C. Valve Handle
D. Selected Attachment
4. Set the MODE switch to the WAND position.
Turn the VAC switch to ON.
5. To scrub with the power wand, turn the
cleaning tool so the brush is facing down.
A
B
06601
HARD FLOOR WAND
A. Cleaning Tool
B. Brush