Tennant 365, Руководство оператора

Страница: 35 / 102

OPERATION
2-15
365 MM173 (3---90)
12. Place the vacuum fan and filter shaker switch in
the top (Vacuum Fan) position.
13. Place the II Speed
t
switch in the bottom
(Main Brush 1) or the top (Main Brush 2)
position depending on the debris to be picked
up.
14. Move the main brush position lever to the (Main
Brush Down) or (Main Brush Free-Free)
position.
15. Move the side brush position lever to the (Side
Brush Down and On) position.
16. Continue sweeping as required.
POST OPERATION CHECKLIST --- ENGINE
OPERATING
Check brush pattern for width and evenness.
TO STOP MACHINE
NOTE: Before leaving the machine, perform the post
operation checks.
1. Return the directional control pedal to the
“neutral” position. Apply the brake.
2. Pull the side brush position lever back into the
(Side Brush Up) position.
3. Pull the main brush position lever back into the
(Main Brush Up) position.
4. Place the vacuum fan and filter shaker switch in
the middle position.
5. Turn the operating lights off if used.
6. Place the throttle control in the (Idle) position.
7. Set the machine parking brake.
8. Turn the ignition key switch counterclockwise.
Remove the key from the ignition switch.
FOR SAFETY: Before leaving or servicing
machine; stop on level surface, set parking brake,
and turn off machine and remove key.
9. Close the LPG tank liquid service valve.
POST OPERATION CHECKLIST --- ENGINE
STOPPED
Check the skirts for damage, wear, and adjustment.
Check for wire or string tangled on the brushes.
Check for LPG odor, or frost on the LPG hoses and
components, indicating a leak.
Check for leaks.
OPERATION ON GRADES
Drive the machine slowly on grades. Use the service
brakes to control machine speed.
FOR SAFETY: When using machine, go slow on
grades and slippery surfaces.
The maximum rated ramp climb and descent angle
is 15
_
with an empty hopper, and 10
_
with a full
hopper.