Tennant 1186, Руководство оператора

Страница: 28 / 70

OPERATION
1186 MM267 (6–94)
2Ć16
MACHINE TROUBLESHOOTING
Problem Cause Remedy
Excessive dusting Dust skirts and seals worn, Replace or adjust skirts
damaged, not adjusted properly or seals
Dust filter clogged Shake and/or clean or
replace filter
Vacuum hose damaged Replace vacuum hose
Vacuum belt slipping or broken Adjust or replace belt
Poor sweeping performance Brush bristles worn Replace brushes
Brushes not adjusted properly Adjust brushes
Debris caught in brush drive Free mechanism of debris
mechanism
Hopper not adjusted properly Adjust hopper floor clearance
Hopper full Empty hopper
Hopper floor skirts worn, damaged Replace skirts
Trailing water – poor Worn rear squeegee Rotate or replace rear
or no water pickup squeegee blade
Rear squeegee out of adjustment Adjust rear squeegee
Solution tank inspection cover Adjust cover or replace seal
seal broken
Vacuum hose clogged Flush vacuum hoses
Solution tank full Drain tank
Float stuck shutting off vacuum Clean float and float guide
Debris caught on squeegee Remove debris
Debris hopper full Empty hopper
Foam filling solution tank Empty solution tank;
change detergent
Vacuum hose to squeegee Reconnect or replace vacuum
disconnected or damaged hose
Vacuum fan to solution tank Replace hose
hose damaged
Vacuum fan belt slipping or broken Adjust or replace belt
Little or no solution flow Solution tank empty Fill solution tank
to floor
Solution supply line to debris Connect solution supply
hopper disconnected line
Solution supply lines clogged Flush solution supply lines
Poor scrubbing performance Debris caught on scrub brushes Remove debris
Improper detergent or brushes Check with TENNANT
used representative for advice
Worn scrub brushes Replace scrub brushes
Scrub brushes out of adjustment Adjust scrub brushes
Debris hopper full Empty hopper