Tennant 1186, Руководство оператора

Страница: 20 / 70

OPERATION
1186 MM267 (6–94)
2Ć8
ENGINE CHOKE KNOB
The engine choke knob controls the engine
choke which helps start cold engines. To engage
the choke, pull the knob out. To disengage the
choke, push the knob in. Do not choke a warm
engine.
CIRCUIT BREAKERS AND FUSES
Circuit breakers are resetable circuit protection
devices designed to stop the flow of current in the
event of a circuit overload. Once tripped, circuit
breakers must be manually reset by pressing the
circuit breaker button in. If the overload which
caused the circuit breaker to trip is still present in
the circuit, the circuit breaker will continue to stop
current flow until the overload is corrected.
The circuit breakers are located on the instrument
panel.
The following chart shows the various circuit
breakers and the electrical components they
protect.
PROTECTIVE
DEVICE
RATING CIRCUIT PROTECTED
CB–1 15 A Shaker Motor
CB–2 15 A Hour Meter,
Thermo-Sentry
,
Alternator
VACUUM SHUT-OFF KNOB
The vacuum shut-off knob controls the
vacuum to the dust filter. To stop vacuum to the
dust filter, pull the knob out. To vacuumize the
dust filter, push the knob in.
PARKING BRAKE LEVER
The parking brake lever controls the brake
on the front wheel.
To set the parking brake, step on the lever and
release it into the long notch on the left. To
release the parking brake, step on the lever and
release it into the short notch on the right.
Always park on a level surface, stop the engine,
and set the parking brake before leaving the
machine unattended and before working on the
machine.
SQUEEGEE LEVER
The squeegee lever controls the position of the
rear squeegee.
To raise the squeegee, lift the lever into the up
position. To lower the squeegee, lower the lever
into the down position.
SIDE BRUSH ARM
The side brush arm controls the position of
the side brush.
To raise the side brush, pull the lift arm up and
push it back into the raised position. To lower the
side brush, pull the arm forward and release it into
the down position.
When parking the machine, always raise the
brush to prevent the brush bristles from taking a
set.
A
03135
RAISING SIDE BRUSH ARM
A. Side Brush Arm