Tennant 1186, Руководство оператора

Страница: 23 / 70

OPERATION
2Ć11
1186 MM267 (6–94)
TO SWEEP
Plan the sweeping in advance. Try to arrange long
runs with minimum stopping and starting. Sweep
debris from very narrow aisles into main aisles
ahead of time. Do an entire floor or section at one
time.
Pick up oversize debris before sweeping. Flatten
or remove bulky cartons from aisles before
sweeping. Pick up pieces of wire, twine, string,
etc., which could become entangled in brush or
brush plugs. Overlap brush paths.
Sweep as straight a path as possible. Avoid
bumping into posts or scraping the sides of the
sweeper.
1. Move the main brush lever into the (Main
Brush Down) or (Main Brush Free-Float)
position.
2. Move the side brush arm into the down
position.
3. Make sure the solution switch is turned off.
4. Push in the vacuum shut-off knob.
5. Raise the rear squeegee with the squeegee
lever.
6. Sweep as required.
TO DUMP HOPPER
1. Pull the main brush lever into the (Main
Brush Up) position.
2. Pull the side brush arm into the raised
position.
NOTE: The filter shaker by-pass switch must be
in the “on” position to shake the dust filter when
the engine is turned off.
3. Slowly drive the machine up to the dump
site or dumpster. Park on a level surface.
4. Stop the engine and set the machine
parking brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine.
5. Lift the filter cover.
6. Lift the front of the debris hopper and pivot
the hopper on the hangers to dump the
debris.
WARNING: Heavy Hopper. Get Help To
Handle.
A
06316
DUMPING HOPPER
A. Hopper
7. Lower the hopper.
8. Slowly back the machine away from the
dump site or dumpster.
POST OPERATION CHECKLIST – ENGINE
OPERATING
Check brush pattern for width and evenness.
TO STOP MACHINE
1. Raise the main brush and side brush.
2. Turn the on-off switch key to the left.
Remove the key from the on-off switch.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine And Remove
Key.
3. LPG powered machines: Close the LPG
tank liquid service valve.