Tennant 1186, Руководство оператора

Страница: 26 / 70

OPERATION
1186 MM267 (6–94)
2Ć14
TO DRAIN SOLUTION TANK AND EMPTY
DEBRIS HOPPER
1. Park the machine next to a floor drain. Stop
the engine and set the machine parking
brake.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine.
NOTE: The filter shaker by-pass switch should be
in the “off” position to prevent the filter shaker
from shaking.
2. Remove the solution tank drain hose from its
retention plug. Lower the hose to the floor
drain to drain the tank.
NOTE: The tank will not empty with the vacuum
fan operating.
A
B
C
03148
SOLUTION TANK DRAIN HOSE
A. Plug
B. Drain Hose
C. Access Door
3. Spray the inside of the solution tank with
clean water. Remove all sludge and debris
from the bottom of the tank.
NOTE: The water must not be hotter than 130 F
(54 C) or tank damage may occur.
4. Rinse the screen filter at the bottom of the
tank with clean water.
B
A
06313
SCREEN FILTER
A. Screen Filter
B. Solution Tank Fill Opening
5. Return the drain hose to its retention plug.
6. Partially fill the solution tank with clean
water. Turn on the solution flow switch until
clean water flow out of the solution nozzle
(1 to 2 minutes) to flush out the solution
pump.
7. Remove the solution tank drain hose from its
retention plug. Lower the hose to the floor
drain to drain any remaining water in the
tank.
8. Disconnect the solution line from the debris
hopper.
A
B
06314
SOLUTION LINE
A. Debris Hopper
B. Solution Line