Snappi System User Manual
Document No: 053-05 v19
Page 27 of 66
March 2013
Snappi System User Manual.doc
Fig 5.3.3
First, remove the seat back pad from the
frame (see section 5.2).
Next, feed the Velcro straps though the
slots, and join together to secure the
headrest in place.
Finally, refit the seat back pad to the seat
frame.
Fig 5.3.4
Fig 5.3.5
The lateral head supports are supplied with
two M8 coach bolts, and two 30mm hand
wheels per bracket (see Fig 5.3.5)
To fit the head supports:
The lateral head supports are fitted by
securing with coach bolts and hand wheels,
through the mounting slots ‘I’ (see Fig 5.3.6)
on the back of the seat unit.
The position of the laterals can be adjusted
laterally by loosening the hand wheels and
sliding them in or out to the required width.
They can be adjusted vertically by sliding up
and down the mounting slots ‘I’(see fig
5.3.6).
Fig 5.3.6
I
