Snappi System User Manual
Document No: 053-05 v19
Page 13 of 66
March 2013
Snappi System User Manual.doc
Fig 4.1.2.4
To fold the frame:
Standing beside the frame, pull up the 2
locking sliders as shown (see Fig 4.1.2.4).
Whilst holding the locks open, push down
with your arm on the upper frame or push
handle, so that the frame starts to fold.
Release the locking sliders, and fold down
the frame by moving the push handle down
as far as it will move.
IMPORTANT:
Always check that BOTH frame locks are fully closed before using the frame. If they
are not properly engaged, the frame could collapse during use.
4.2 Brakes
Fig 4.2.1
To apply the brake, put your foot on the top
of brake bar (labelled X) and push down as
shown. The brake will flip down onto the
wheels and lock them.
To release the brake, hook your foot
between the middle raised portion of the
brake bar, and the frame cross bar. Then,
lift the brake bar with your foot until it flips
back and stops against the brake stop pins.
Please note you may find it easier to use
your hand to release the brake.
Important:
Always put the brake on when placing the
child in, or taking them out of the pushchair.
Do not leave the brake on when the
pushchair is not in use as this will damage
the rear wheels.
Fig 4.2.2
WARNING:
The brake mechanism is spring loaded so care must be taken when operating it.
