Snappi System User Manual
Document No: 053-05 v19
Page 26 of 66
March 2013
Snappi System User Manual.doc
Fig 5.2.3
To remove the side pads:
Undo the 2 ‘popper’ fasteners, (See Fig
5.2.3) and unpeel the Velcro securing the
pad.
The pad will then be free to remove.
To remove the back pad:
Undo the 2 ‘popper’ fasteners located on
the top left and right corners of the seat (see
right).
Next unhook the top of the back pad from
the seat, and then un-tuck the material from
around the bottom of the seat back plates to
release the cover.
Fig 5.2.4
5.3 Fitting a Headrest Pad or Lateral Head Supports (optional)
Fig 5.3.1
To fit a headrest pad:
There are three types of one piece headrest
available; standard, extra recess (Fig 5.3.1)
and occipital roll, however these can all be
fitted to the seat in the same way.
The headrest pads include a pair of Velcro
securing straps.
The headrest is fitted to the cover, through
the upper fitting slots (see Fig 5.3.2).
Fig 5.3.2
