Snappi System User Manual
Document No: 053-05 v19
Page 44 of 66
March 2013
Snappi System User Manual.doc
Fig 6.4b.3
The new sun hood includes 2 button clips
on the back of the mounting poles as shown
(see Fig 6.4b.3, left).
To fit the hood, stand behind the seat and
slide the mounting poles into the receivers
with the button clips facing you. Press in the
button clips both sides and then slide the
hood down into position as shown (see Fig
6.4b.4, right).
Fig 6.4b.4
Fig 6.4b.5
The button clips will lock the hood into the
top position as shown (see fig 6.4b.5, left). If
needed the hood can be dropped to the
lower hole position, to do this push in the
button clips and slide the hood down until it
locks into the lower position.
To remove the hood, press in the button
clips and lift (note it may be easier release
one side at a time, once both clips are out of
the upper hole position, the hood will then
be free to lift out of the frame).
