Blizzard G4 User Manual
20
Projector Slide Direction
Blizzards with the Projector Slide option ship from the
factory configured for tabletop operation, left slide –
shown here…
If that is what you need, skip the next section.
Projector Slide Mount, Tabletop/Left Slide factory default
configuration
Reversing Slide Direction
To switch to Right Slide:
1.
Remove the slide latch knobs and flip the slide
latches back, as shown here. This gives access
to the projector bridge clamp screws
2.
Using a #2 Philips screwdriver, loosen the
projector bridge clamp screws until they are
no longer engaged in the projector bridge
clamps.
3.
Repeat on the other side of the slide assembly
until all eight screws are free.
4.
Lift out the slide tray assembly, turn it around
so that the slide latches are on the right side,
and replace.
5.
Re-engage the eight projector bridge clamp
screws and tighten (use a small screwdriver to
align the projector bridge clamps if you need
to).
6.
Replace the slides and slide latch knobs.
Slide latch knob
Slide Latch
Projector bridge
clamp screws
Projector bridge
clamp
