TEMA TELECOMUNICAZIONI SRL
Doorphone AA-514
MAS-AA514-REV03EN
Page 38 of 56
9. PARAMETERS PROGRAMMING AND COMMANDS
9.1.
Parameters programming
To enter in programming mode it is necessary to call AA-514 system, wait for the answer and then digit the code
*** (3 time star key). Wait for a confirmation long beep, then digit the programming password code (parameter 154,
default *1234): if the password matches the system will play one confirmation long beep.
AA-514 is now ready to receive the parameters values to program. It will come back in stand by mode if nothing is
received for more than 20 seconds or a busy tone is detected. So insert the number of the parameter to set
followed by the # (pound key) digit; wait for the confirmation long beep and insert the correct value for the
parameter. Wait for the confirmation short beep and then digit the # (pound key) digit to store the inserted value.
AA-514 will play a confirmation long beep. If it is entered a wrong parameter number, AA-514 wil play 3 error short
beep. It means that the number of parameter inserted is invalid. If the number of parameter and his value are
correctly entered but you want to cancel the operation it is necessary to insert * (star key) digit instead of # (pound
key) digit; AA-514 wil play 3 error short beep and the operation is cancelled.
For example, if you want to call number 220 when is pressed the button 1 in Day mode follow the next instructions:
•
Call the number where AA-514 is connected
•
Wait for the AA-514 answer
•
Insert *** (3 time star key)
•
Wait for a long confirmation beep
•
Insert programming password code (default *1234)
•
Wait for a long confirmation beep
•
Insert 110# (parameter 110)
•
Wait for a long confirmation beep
•
Insert 220 (parameter value)
•
Wait for a short confirmation beep
•
Insert # (confirm data and store it)
•
Wait for a long confirmation beep
Parameters are completely inserted when no more digit are pressed for more than 4 seconds. Only at the end of
this time AA-514 will play confirmation short beep. However, filling all the parameter fields, the confirmation short
beep will be played immediately.
If you want to set a parameters with an empty value it is necessary to insert the number of parameter to empty
followed by the # (pound key) digit, wait for about 4 seconds to heard a short beep of confirmation without insert
anything and then insert # (pound key) digit and wait for the confirmation long beep. The parameter has now empty
value.
If during the parameters programming a wrong parameter number is inserted, AA-514 will report this event with 3
short beeps of error condition.
After about 20 seconds of inactivity, AA-514 will close the comunication and will come back in standby mode.
If you want to close the comunication without waiting for disconnecting time, digit 0# (zero followed by pound key)
and AA-514 will immediately close the communication and will come back to standby mode.
Otherwise is possibile to hang up the line: AA-514 will detect the busy tone, close immediately the communication
and come back to standby mode.
