Tema Telecomunicazioni AA-502 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 56

background image

TEMA TELECOMUNICAZIONI SRL

Doorphone AA-514

MAS-AA514-REV03EN

Page 28 of 56

8.3.4. Connection of the base system AA-514C with camera

In the system  AA-514C is housed   a camera
equipped  with  a  video  cable  terminated  with
a female RCA connector.

At  this  connector  is  already  possible  to
connect  a  monitor  that  has  a  video  input.
This could be useful for making a test before
the  installation  and  normally  the  video  signal
is not carried out on long distances using this
type of connection.

Rather  than  providing  a  shielded  cable
between  the  doorphone  and  the  operator
monitor  is  more  practical  to  use  the  "balun"
interfaces  (balancer-unbalancer)  and  bring
the  signal  using  a  twisted  telephone  pair.
Typically, it is possible to use one of the pairs
of an UTP cat.5 cable.

Supplied  with  the  system  is  present  an
accessory  that  plugs  into  the  RCA  video
connector  on  the  system  AA-514C  and
transforms it in an output screw terminals for
connecting  the  telephone  pair  described
above.  This  accessory  is  suitably  protected
against  accidental  contacts  being  electrically
insulated  from  its  metal  parts  with  the  use  of
a special protective thermoformed cover.

Immediately  near  the  operator  monitor  must
be  connected  on  the  same  pair  another
"balun"  (also  supplied  with  the  unit)  who  will
present  the  video  signal  to  the  monitor  on  a
male  BNC  connector  which  can  further  be
linked  to  other  adapters  (BNC  to  RCA  etc.)
according  to  the  type  of  monitor  input  to  be
connected.

Using  supplied  baluns  the  maximum  cable
length  between  AA-514C  and  the  monitor  is
around 300 meters.

Connect wires of the pair to the baluns, in the
same way, respecting the same polarity.

Video
Video  out  connector  of  the  built-in  camera.
Female RCA connector.

Adapter
Supplied  accessory  kit  for  connecting  the
video  signal  on  twisted  pair  cable,  normal
telephone twisted-pair.

Cable Out
Terminals for the connection of twisted pair to
transport the video signal.

Make  the  connection  of  the  twisted  pair  and
insert  the  adapter  into  the  connector  of  the
camera,  put  it  all  back  in  the  plastic  back  so
that  it  does  not  create  too  much  bulk  to  the
board,  allowing  the  correct  closure  of  the
front of the system.

AA-514C
Video out

    UTP
pair/cable


300 meters
maximum                                          Local
                                                        adapter

.

.

Remote
adapter

«
...
26
27
28
29
30
...
»

Содержание AA-502

























































Отзывы:

Нет отзывов

Похожие инструкции для AA-502

Бренд: Safeline Страницы: 20

Бренд: abc Страницы: 8

Бренд: Da-Lite Страницы: 8

Бренд: Panasonic Страницы: 1

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 20

Бренд: Xtrons Страницы: 30

Бренд: Spon Страницы: 9

Cynema Soundfield CSF48A

Бренд: Niles Страницы: 37

Бренд: Hama Страницы: 75

Бренд: M-system Страницы: 5

Бренд: Bayrol Страницы: 56

Бренд: Steren Страницы: 6

Бренд: Clarion Страницы: 83

Varixx UMS 4401 SPCD

Бренд: Grundig Страницы: 47

Бренд: REV Страницы: 2

Disco Jam PSUFM1035A

Бренд: Pyle Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды