Multiparty Call Features *
Multiparty call features are handled within an active call. These features are network-dependent.
Contact your service provider for availability.
• To release all held calls or set User Determined User Busy for a waiting call, press:
0 <Flash>
• To release all Active Calls and accept the held/waiting call, press:
1 <Flash>
• To release a specific active call x, press:
1 x <Flash>
(x represents the call ID 1-7)
• To place all active calls on hold and accept the held/waiting call, press:
2 <Flash>
• To place all active calls on hold except call x, press:
2 x <Flash>
(x represents the call ID 1-7)
• To add a held call to the conversation, press:
3 <Flash>
• To place all active calls on hold and make a call to a specified number, press:
Phone No
<Flash>
NOTE
: When both a held and a waiting call exist in a conflicting situation, the above procedures
apply to the waiting call.
* Not available with the Phonecell
®
SX5 PBX Terminal.
Phonecell
®
SX5 GSM
14
User Manual
