SX5 USER FEATURES
The SX5 has many user features and setup options that can be accessed using a telephone
connected to the SX5. To access these features, press the key sequence for the option at any
time. Some options are not available while in a call. See the
Call Functions
section of this
manual for functions that are allowed while in an active call (In-Call Functions).
All user options have a sequence of digits entered from the telephone keypad. For example, to
change to a UK ringer style, press
#
*
100
*
2 #
. After the key sequence is entered, the dial
tone will be heard to confirm that the option has been changed or set. If there is an error, three
tones will be heard before the dial tone.
HINT:
Make sure to use a tone-dial (DTMF) type telephone when accessing any user feature or
option that requires a key sequence. Pulse dial or rotary dial telephones will not allow key
(DTMF) sequences.
Messages (Voice Mail and Text Messages)
The SX5 is capable of receiving both text and voice mail messages. The Message LED will flash
once a message is received indicating that a text or voice message waiting.
Voice Mail Access
To check for voice mail, dial your voice mail access number and follow the prompts. Contact your
service provider for more information.
Text Messaging (SMS)
The SX5 allows you to send and receive text messages using a Personal Computer (PC). To do
this, you need a PC connected to the SX5 serial port (see the
Connecting to a Computer
section
of this manual). The SX5 supports the GSM AT command set defined in GSM 07.05 for Short
Message Service (SMS).
Message Indication Clearing
The Message LED will flash until you remove the message notification from the SX5. After you have
heard or read you messages, you can clear the notification by pressing
#
*
112
#
on your phone.
NOTE:
All text messages will be erased when you clear the notification.
Audio Settings
Line Level
The Line Level option controls the handset volume for any telephones connected to the SX5.
Press:
#
*
69
*
<output level> #
0
= Low
1
= Normal (default)
2
= High
Ringer Styles
The SX5 can be set to use one of three different ringer styles (US, UK, or European). Any phone
connected to the SX5 will ring according to the alert type selected. If the Ringer Style is set to
Off, there will be no audible alert.
Press:
#
*
100
*
<line alert option> #
1
= US (default for 1900 MHz model)
2
= UK (default for dual-band model)
3
= European
0
= Off
Dial Settings
Dial Delay
The Dial Delay is the time that the SX5 waits after a number is dialed before automatically send-
ing the number.
Press:
#
*
11
*
<delay> #
The delay must be between 2 and 20 seconds. The default delay time is 3 seconds.
Phonecell
®
SX5 GSM
8
User Manual
